Refined by
Hide irrelevant options
Produktgrupp
Show all filters
Hide all filters
Midi fuses
Maximum voltage: 32 V DCCurrent rating: 1-40 ASize (W x D x H): 18.8 x 5.0 x 18.7 mm
This part is also available in retail packaging (pin-pac) with barcode, then with the suffix -PP added to the end of the part number.
- Release characteristic:
- Fast (F)
- Type of current:
- DC
- Colour code:
- Blue, Brown, Yellow, Grey, Green, Pink, Red, Black, Purple, Other
- Nominal voltage DC:
- 32 V
- Max. current (Imax):
- 1-40 A
- Nominal current:
- 1-40 A
- Fuse type:
- Midi
- Release characteristic:
- Medium time-lag
- Type of current:
- DC
- Colour code:
- Blue, Brown, Yellow, Green, Pink, Red, Purple, Other
- Nominal voltage DC:
- 32 V
- Max. current (Imax):
- 3-30 A
- Nominal current:
- 3-30 A
- Transparent:
- Yes
- Fuse type:
- Micro II
Terminal block with lever, 1-3 Poles
Terminal block for both solid and stranded cable.
Transparent cover for easy inspection of connector. No tool needed. Solid conductors can be connected when closed.
Stripping range: 12 mm
Contact resistance: ≤0. 015 Ω
Insulation resistance: ≥1000 MΩ
Material
Contact: Copper
Plastic parts: Polycarbonate (PC)
Spring: Stainless steel
- Nominal voltage:
- 450 V
- Nominal current:
- 32 A
- Transparent:
- Yes
- Number of clamp positions:
- 2-6 .
- With operation lever:
- Yes
- Suitable for solid core:
- Yes
- Suitable for flexible core:
- Yes
- Suitable for multi-wire core:
- Yes
- Colour:
- Green
- Connector type:
- Spliceing connector
Splicing connectors for tap wires
Splicing connector for 1 or 2 tap wires from a run through cable. The run through cable is connected with Insulation Displacement Connection (IDC).
A quick connection can made on mid-span of a wire without cutting and stripping. A good solution when space is limited or if the cable is so short it could be difficult to connect to connector again after cut and stripped.
Tap wires are connected with lever.
Transparent cover for easy inspection of connector. No tool needed. Solid conductors can be connected when closed.
Stripping range: 10 mm
Contact resistance: ≤0. 015 Ω
Insulation resistance: ≥1000 MΩ
Material
Contact: Copper
Plastic parts: Polycarbonate (PC)
Spring: Stainless steel
- Nominal voltage:
- 450 V
- Nominal current:
- 24 A
- Transparent:
- Yes
- Number of clamp positions:
- 1-2 .
- With operation lever:
- Yes
- Suitable for solid core:
- Yes
- Suitable for flexible core:
- Yes
- Suitable for multi-wire core:
- Yes
- Colour:
- Red, Blue
Assortment box with Splicing Connectors & Terminal Blocks - 105 pieces
Splicing connectors for both solid and stranded cable.
Transparent cover for easy inspection of connector. No tool needed. Solid cables can be pushed in without opening the lever.
Stripping range splicing connectors: 11 mm
Stripping range terminal blocks: 12 mm
Delivered in box TL10 and contains:
Splicing connectors
SC-2 0240: 20 pcs
SC-3 0240: 20 pcs
SC-4 0240: 10 pcs
SC-5 0240: 10 pcs
Terminal Blocks
SC-2 0240-S: 20 pcs
SC-4 0240-S: 10 pcs
SC-6 0240-S: 5 pcs
Mounting holes for SC-4 0240-S & SC-6 0240-S
SCH-S3.2: 10 pcs
- Nominal voltage:
- 450 V
- Nominal current:
- 32 A
- Transparent:
- Yes
- Number of clamp positions:
- 2-6 .
- With operation lever:
- Yes
- Suitable for solid core:
- Yes
- Suitable for flexible core:
- Yes
- Suitable for multi-wire core:
- Yes
- Colour:
- Green
Battery-Powered Crimp Tool - NSBT IC400
The NSBT IC400 is a battery-powered crimping tool for copper and aluminum cable lugs without any need of swapping dies. Cable lugs and splice sleeves from 16-400 mm² for copper and 50-400 mm² for aluminum.
The NSBT IC400 operates with a V-crimp system, making it compatible with most types of cable lugs and sleeves. The tool continues to apply pressure until the correct resistance is reached, which means it crimp a bit further if the physical area of the cable is slightly off (a common issue today as cable area is now often determined by conductivity rather than physical size).
Crimps performed with this tool meet standards IEC 61238-1 and SEN 24 50 10/12. The tool comes in a durable case with a Bosch battery, charger, shoulder strap, and a test pin. The test pin is used to verify that the crimping tool is correctly calibrated.
Optional accessories for the NSBT IC400 include pre-forming dies and C-sleeve dies for additional functionality.
- Rotatable crimping head allows operation even in confined spaces.
- The piston automatically returns but can be stopped at any position, reducing cycle time as it doesn’t need to fully reset.
- No setup time for changing die and no extra investment in dies for different sizes, resulting in less to carry and keep track of.
- Equipped with a Bosch Li-Ion battery with an indicator.
- LED lighting to facilitate work in dimly lit areas.
Technical data:
Max pressure: 700 bar
Crimping force: 109 kN
Capacity: 16-400 mm² Cu / 50-400 mm² Al
- Number of crimps:
- 1 (16-95mm² Cu), 2 (120-400mm² Cu), 2 (50-95mm² Alu), 3 (120-400mm² Alu)
- With locking device (for mechanical tools):
- No
- Inserts exchangeable:
- Yes
- Number of included inserts:
- 1 .
- With automatic return:
- Yes
- Cycle time:
- 5 s
- Compression force:
- 221 kN
- Suitable for:
- Cable lugs and connectors
- Construction/operation:
- Accumulator-hydraulic
- Compression shape:
- Arbour clamping
Angled Battery terminal, crimping
BTCx-serien Batterikabelsko i förtent mässing.
Högervinklade (från kabeln sett):
BTCR 25 M TP (-) / BTCR 25 P TP (+): 25 mm²
Pressas med pressback: NH 10-12 / Backmärkning: 12
BTCR 35 M TP (-) / BTCR 35 M TP (+): 35 mm²
Pressas med pressback: AHE 5070 / Backmärkning: CU50/AL35
BTCR 50 M TP (-): 50 mm²
Pressas med pressback: AHE 5070 / Backmärkning: CU70/AL50
BTCR 70 M TP (-) / BTCR 70 P TP (+): 70 mm²
Pressas med pressback: AHE 95120 / Backmärkning: CU95/AL70
Vänstervinklade (från kabeln sett):
BTCL 25 M TP (-) / BTCL 25 P TP (+): 25 mm²
Pressas med pressback: NH 10-12 / Backmärkning: 12
BTCL 35 M TP (-) / BTCL 35 P TP (+): 35 mm²
Pressas med pressback: AHE 5070 / Backmärkning: CU50/AL35
BTCL 70 M TP (-) / BTCL 70 P TP (+): 70 mm²
Pressas med pressback: AHE 95120 / Backmärkning: CU95/AL70
- Type of accessory/spare part:
- Battery terminal
- Insulated:
- No
- Surface protection:
- Tinned
- Cable connection type:
- Kontaktpressning
- Connection around pole:
- Skruvförband
- Accessory:
- Yes
- Spare part:
- No
Splicing Connectors, push-in
Splicing connector for 2 to 8 conductors for both solid and stranded cable.
Transparent cover for easy inspection of connector. No tool needed.
Voltage: 450 V
Stripping range: 10 mm
Solid cable 0.5-2.5 mm²
Fåtrådig kabel 0.75-2.5 mm²
Stranded cable with cord end sleeve: 0.5-1.5 mm2
- Nominal voltage:
- 450 V
- Nominal current:
- 24 A
- Transparent:
- Yes
- Number of clamp positions:
- 2-8 .
- With operation lever:
- No
- Suitable for solid core:
- Yes
- Suitable for flexible core:
- Yes
- Suitable for multi-wire core:
- Yes, No
- Colour:
- Grey, Orange, Yellow, Red, White
- Connector type:
- Terminal Block
Cable ties for automatic machine – reel
Cable ties to be used with automatic bundling system. To be used where volumes are high for ex. within harness manufacturing or automotive industry.
Universal, works in NCTM RCT-machines and most other brands for applicable length/width of cable tie.
Comes as natural or black weather resistant.
- Detectable:
- No
- Model:
- Internal toothing
- Material quality:
- Polyamide (PA)
- Band closure:
- Plastic lip/-cam
- Transparent:
- No
- Fluorescent:
- No
- Solvable fastener:
- No
- Colour:
- Black, Natural colour
- Surface protection:
- Untreated
- Material:
- Plastic
- Reel/roll packaging:
- No
- Model:
- Bushing
- Max. current (Imax):
- 8-10 A
- Insulation:
- Not isolated
- Colour insulation:
- Other
- With cam clamp:
- No
- With tap spreader:
- No
- Material insulation:
- Other
- Material:
- Brass
- Neck type:
- Open barrel crimp
Nylflex, PA6, Automotive
Halogenfri, svårantändlig, värmestabil och UV-beständig. En ADR-godkänd standardslang med god flexibilitet som ger ett mycket gott skydd för elektriska ledningar mot fukt, smuts och mekanisk åverkan. Materialet är dessutom motståndkraftigt mot oljor, fett, lösningsmedel och drivmedel av olika slag. För fordonsindustrin, maskin och apparatbyggen samt för verkstäder.
Material: PA 6
Temperaturområde: -40° C till +120° C
Färg: Svart RAL 8022
Övriga egenskaper: UV-beständig, flamavvisande
Tryckhållfasthet: 350 N / 50 mm, slag 6J
- Compressive strength:
- 350 N
- Fire resistance according to UL94:
- HB
- Oil resistant:
- Yes
- Lengthwise slotted:
- No
- Closable (two-part):
- No
- With draw wire:
- No
- High conducting inner coating:
- No
- Degree of protection (IP):
- IP66
- Colour:
- Black
- Material:
- Polyamide 6
- Halogen free:
- Yes
- Suitable in fire resistance areas:
- Yes
- Approved according to DIN EN 61386-23:
- No
- Approves according to Vd TÜV/GGVS:
- Yes
- Approved according to LUL/British Standard:
- No
- Approved according to Lloyd's Register TA:
- No
- Approved according to UTAC:
- No
- Approved according to DIN 5510:
- No
- Approved according to NF F 16-101:
- No
- VDE tested:
- Yes
- Approved according to CSA:
- No
NELCON (CGPT), 2:1, without adhesive, die-cut
Nelcon is a strong, flexible, heat shrink tubing for universally use. Nelcon has good resistance to fluids and solvents, and good dielectric strength.
Shrink ratio at 2:1 and 3:1, and the tubes unique combination of chemical, electrical and physical properties it is suitable for a variety of uses.
Applications:
Electrical insulation, strain relief, bundling, mechanical protection, colour coding of wires, cables, tubes and electronic components.
Material: Polyolefin
Temperature range: -40º C to +135º C
Lowest shrink temperature: +120º C
Wall thickness: Thin wall
Shrink ratio: 2:1
Self-extinguishing: Yes
- Model:
- Thin-walled
- Transparent:
- No
- Type:
- Heat-shrink
- Shrink rate:
- 2:1
- With inner glue:
- No
- Printable:
- No
- Colour:
- Black, White
- Material:
- Polyolefin (PO-X)
- Halogen free:
- No
DINFLEX 67
Anslutningskabel för data- och elektronikutrustning inomhus. Försedd med gemensam skärm av aluminiumfolie.
Uppbyggnad
Ledare: Blank flertrådig koppar
Ledarisolation: Polyeten
Ledarfärg: Enligt DIN 47100
Bandering: PETP-folie
Skärm: Gemensam skärm av aluminiumfolie. Bitråd av koppar
Yttermantel: PVC
Mantelfärg: Grå
Tekniska data:
Märkspänning: 250 V
Ledarresistans: 98 Ohm/km
Parkapacitans: 50 Pf/km
Temperaturområde: -5ºC till +80ºC
- Number of cores:
- 4-50 .
- Material core insulation:
- Polyvinyl chloride (PVC)
- Specification core insulation:
- Other
- Core identification:
- Colour
- Protective conductor:
- No
- Material outer sheath:
- Polyvinyl chloride (PVC)
- Specification material outer sheath:
- Other
- Colour outer sheath:
- Other
- Flame retardant:
- According to IEC/EN 60332-1-2
- Permitted cable outer temperature after assembling without vibration:
- -30-80 °C
- Conductor material:
- Copper
- Twisted cores:
- Yes
- Max. conductor temperature:
- 80 °C
- Screen:
- Yes
- Armouring/reinforcement:
- Other
- Insulation integrity:
- N/A
- Drain wire:
- No
- Nominal voltage:
- 250 V
- Halogen free:
- No
- Conductor category:
- Class 5 = flexible
- Colour:
- Grey
- Material insulation:
- Polyvinyl chloride (PVC)
- Core colour:
- Several
- Conductor surface:
- Bare
- Halogen free:
- No
- Min. permitted bending radius, stationary application/permanent installation:
- 22.5-85.5 mm
- Reaction-to-fire according to EN 13501-6: Class:
- N/A
- Reaction-to-fire according to EN 13501-6: Smoke production:
- N/A
- Reaction-to-fire according to EN 13501-6: Flaming droplets/particles:
- N/A
- Reaction-to-fire according to EN 13501-6: Acidity:
- N/A
- Low smoke (according to EN 61034-2):
- No
- Low temperature resistant (according to EN 60811-504+505+506):
- No
- Oil resistant according to EN IEC 60811-404:
- No
DINFLEX-Y (LiYY) - Korta längder, parttvinnade
Flexible electronic cable with fine wire conductor structure, as in combination with PVC sheath it provides a very flexible cable with a small bending radius. It is used for signal, measurement, control and tone-frequency transmission in electronics, computers and signal systems.
Structure Conductor: Blank stranded copper
Conductor insulation: PVC
Core identification: According to DIN 47100
Outer Sheath: PVC
Sheath identification: Grey
Technical data:
Rating voltage: 0.14 mm² = 350 V >; 0.14 mm² = 500 V
Test voltage: 0.14 mm² = 800 V >; 0.14 mm² = 1200 V
Temperature range: Fixed min/max: -30ºC to +70ºC (-22ºF to +158ºF)Moving min/max: -5ºC to +70ºC (-22ºF to +158ºF)
Radiation Resistance: 8 x 107 cJ/kg
Minimum bending radius: 10 x cable diameter
Oil resistance: Good
Flame resistance: IEC 332-1
- Number of cores:
- 4-50 .
- Material core insulation:
- Polyvinyl chloride (PVC)
- Specification core insulation:
- Other
- Core identification:
- Colour
- Protective conductor:
- No
- Material outer sheath:
- Polyvinyl chloride (PVC)
- Specification material outer sheath:
- Other
- Colour outer sheath:
- Other
- Flame retardant:
- According to IEC/EN 60332-1-2
- Permitted cable outer temperature after assembling without vibration:
- -30-70 °C
- Conductor material:
- Copper
- Twisted cores:
- Yes
- Max. conductor temperature:
- 70 °C
- Screen:
- No
- Armouring/reinforcement:
- None
- Insulation integrity:
- N/A
- Drain wire:
- No
- Nominal voltage:
- 500 V
- Halogen free:
- No
- Conductor category:
- Class 5 = flexible
- Colour:
- Grey
- Material insulation:
- Polyvinyl chloride (PVC)
- Core colour:
- Several
- Conductor surface:
- Bare
- Halogen free:
- No
- Min. permitted bending radius, stationary application/permanent installation:
- 25.5-62 mm
- Reaction-to-fire according to EN 13501-6: Class:
- N/A
- Reaction-to-fire according to EN 13501-6: Smoke production:
- N/A
- Reaction-to-fire according to EN 13501-6: Flaming droplets/particles:
- N/A
- Reaction-to-fire according to EN 13501-6: Acidity:
- N/A
- Low smoke (according to EN 61034-2):
- No
- Low temperature resistant (according to EN 60811-504+505+506):
- No
- Oil resistant according to EN IEC 60811-404:
- No
NELCON, 2:1, without adhesive, 1.0m lenght
Nelcon is a strong, flexible, heat shrink tubing for universally use. Nelcon has good resistance to fluids and solvents, and good dielectric strength.
Shrink ratio at 2:1 and 3:1, and the tubes unique combination of chemical, electrical and physical properties it is suitable for a variety of uses.
Applications: Electrical insulation, strain relief, bundling, mechanical protection, color coding of wires, cables, tubes and electronic components.
Material: Polyolefin
Temperature range: -40º C - +135º C
Lowest shrink temperature: +120º C
Wall thickness: Thin wall
Shrink ratio: 2:1
Self-extinguishing: Yes
- Model:
- Thin-walled
- Transparent:
- Yes, No
- Type:
- Heat-shrink
- Shrink rate:
- 2:1
- With inner glue:
- No
- Printable:
- No
- Colour:
- Black, Green, Yellow, Green/yellow, Red, White, Blue, Colourless
- Material:
- Polyolefin (PO-X)
- Halogen free:
- No
Electro-hydaulic HEX-crimp equipment for 10-240 mm²
The NTHC HX240 is a hexagonal crimp machine that operates without the need for die changes on copper and aluminum cable lugs. The machine utilizes the same dies for cable lugs and splice sleeves, covering a range from 10-240 mm² Cu to 16-150 mm² Al.
The crimping is performed by six sides smoothly sliding against each other from opposite directions, eliminating the risk of protrusions after the crimp. The stepless height adjustment allows for versatile use with various copper and aluminum cable lugs, regardless of the manufacturer.
The NTHC HX240 comes with pre-programmed series for different cable lugs, providing the operator with the ability to save additional settings as needed. Its die-less design saves the user from costly investments and the risk of misplacing die sets.
Technical Specifications:
Press Force: 200 kN
Capacity: 10-240 mm² Cu / 16-150 mm² Al
Max Width: 38 mm
Applicator Width: 8 mm
Power Source: 220 V 50 Hz
Weight: 160 kg
Dimensions: 700 x 860 x 1260 mm
- With locking device (for mechanical tools):
- No
- Inserts exchangeable:
- No
- Number of included inserts:
- 1 .
- With automatic return:
- Yes
- Compression force:
- 200 kN
- Suitable for:
- Cable lugs and connectors
- Construction/operation:
- Electrical
- Compression shape:
- Hexagon
DINFLEX-Y (LiYY) - Drum 500 m
Flexible electronic cable with fine wire conductor structure, as in combination with PVC sheath it provides a very flexible cable with a small bending radius. It is used for signal, measurement, control and tone-frequency transmission in electronics, computers and signal systems.
Structure Conductor: Blank stranded copper
Conductor insulation: PVC
Core identification: According to DIN 47100
Outer Sheath: PVC
Sheath identification: Grey
Technical data:
Rating voltage: 0.14 mm² = 350 V >; 0.14 mm² = 500 V
Test voltage: 0.14 mm² = 800 V >; 0.14 mm² = 1200 V
Temperature range: Fixed min/max: -30ºC to +70ºC (-22ºF to +158ºF)Moving min/max: -5ºC to +70ºC (-22ºF to +158ºF)
Radiation Resistance: 8 x 107 cJ/kg
Minimum bending radius: 10 x cable diameter
Oil resistance: Good
Flame resistance: IEC 332-1
- Number of cores:
- 2-37 .
- Material core insulation:
- Polyvinyl chloride (PVC)
- Specification core insulation:
- Other
- Core identification:
- Colour
- Protective conductor:
- No
- Material outer sheath:
- Polyvinyl chloride (PVC)
- Specification material outer sheath:
- Other
- Colour outer sheath:
- Other
- Flame retardant:
- According to IEC/EN 60332-1-2
- Permitted cable outer temperature after assembling without vibration:
- -30-70 °C
- Conductor material:
- Copper
- Twisted cores:
- Yes
- Max. conductor temperature:
- 70 °C
- Screen:
- No
- Armouring/reinforcement:
- None
- Insulation integrity:
- N/A
- Drain wire:
- No
- Nominal voltage:
- 500 V
- Halogen free:
- No
- Conductor category:
- Class 5 = flexible
- Colour:
- Black, Grey
- Material insulation:
- Polyvinyl chloride (PVC)
- Core colour:
- Several
- Conductor surface:
- Bare
- Halogen free:
- No
- Min. permitted bending radius, stationary application/permanent installation:
- 16-56.5 mm
- Reaction-to-fire according to EN 13501-6: Class:
- N/A
- Reaction-to-fire according to EN 13501-6: Smoke production:
- N/A
- Reaction-to-fire according to EN 13501-6: Flaming droplets/particles:
- N/A
- Reaction-to-fire according to EN 13501-6: Acidity:
- N/A
- Low smoke (according to EN 61034-2):
- No
- Low temperature resistant (according to EN 60811-504+505+506):
- No
- Oil resistant according to EN IEC 60811-404:
- No
DEF-Y (Defense)
Flexible signal cable with fine wire conductor structure, as in combination with PVC sheath it provides a very flexible cable with a small bending radius. It is used for signal, measurement, control and tone-frequency transmission in electronics, computers and signal systems.
Structure Conductor: Tinned copper
Conductor insulation: PVC
Core identification: According def 61-12.
Outer sheath: PVC
Sheath colour: Grey
Technical data:
Rating voltage: 300 V
Test voltage: 1000 V
Temperature range: Fixed min/max: -30ºC to +70ºC (-22ºF to +158ºF)Moving min/max: -5ºC to +70ºC (+23ºF to +158ºF)
Minimum bending radius: 15 x cable diameter
Oil resistance: Good
Flame resistance: IEC 228
- Number of cores:
- 2-25 .
- Material core insulation:
- Polyvinyl chloride (PVC)
- Specification core insulation:
- Other
- Core identification:
- Colour
- Protective conductor:
- No
- Material outer sheath:
- Polyvinyl chloride (PVC)
- Specification material outer sheath:
- Other
- Colour outer sheath:
- Other
- Flame retardant:
- According to IEC/EN 60332-1-2
- Permitted cable outer temperature after assembling without vibration:
- -30-70 °C
- Conductor material:
- Copper
- Twisted cores:
- Yes
- Max. conductor temperature:
- 70 °C
- Screen:
- No
- Armouring/reinforcement:
- None
- Insulation integrity:
- N/A
- Drain wire:
- No
- Nominal voltage:
- 300 V
- Halogen free:
- No
- Conductor category:
- Class 5 = flexible
- Colour:
- Black, Grey, White
- Material insulation:
- Polyvinyl chloride (PVC)
- Core colour:
- Several
- Conductor surface:
- Tinned
- Halogen free:
- No
- Min. permitted bending radius, stationary application/permanent installation:
- 17-44.5 mm
- Reaction-to-fire according to EN 13501-6: Class:
- N/A
- Reaction-to-fire according to EN 13501-6: Smoke production:
- N/A
- Reaction-to-fire according to EN 13501-6: Flaming droplets/particles:
- N/A
- Reaction-to-fire according to EN 13501-6: Acidity:
- N/A
- Low smoke (according to EN 61034-2):
- No
- Low temperature resistant (according to EN 60811-504+505+506):
- No
- Oil resistant according to EN IEC 60811-404:
- No
DEF-CY (Defense)
Flexible signal cable with fine wire conductor structure, as in combination with PVC sheath it provides a very flexible cable with a small bending radius. The cable is fitted with a screen of tinned copper wire, which protects against mechanical stress and particular it isolates all electrical frequency as well inside and outside the cable (EMC Directive).
It is used for signal, measurement, control and tone-frequency transmission in electronics, computers and signal systems.
Structure Conductor: Tinned copper
Conductor insulation: PVC
Core identification: Acc. to def 61-12.
Screen: Tinned copper braid
Outer sheath: PVC
Sheath colour: Grey
Technical data:
Rating voltage: 300 V
Test voltage: 1000 V
Temperature range: Fixed min/max: -30ºC to +70ºC (-22ºF to +158ºF)
Moving min/max: -5ºC to +70ºC (+23ºF to +158ºF)
Minimum bending radius: 15 x cable diameter
Oil resistance: Good
Flame resistance: IEC 228
- Number of cores:
- 2-36 .
- Material core insulation:
- Polyvinyl chloride (PVC)
- Specification core insulation:
- Other
- Core identification:
- Colour
- Protective conductor:
- No
- Material outer sheath:
- Polyvinyl chloride (PVC)
- Specification material outer sheath:
- Other
- Colour outer sheath:
- Other
- Flame retardant:
- According to IEC/EN 60332-1-2
- Permitted cable outer temperature after assembling without vibration:
- -30-70 °C
- Conductor material:
- Copper
- Twisted cores:
- Yes
- Max. conductor temperature:
- 70 °C
- Screen:
- Yes
- Armouring/reinforcement:
- Braiding
- Insulation integrity:
- N/A
- Drain wire:
- No
- Nominal voltage:
- 300 V
- Halogen free:
- No
- Conductor category:
- Class 5 = flexible
- Colour:
- Black, Grey, White
- Material insulation:
- Polyvinyl chloride (PVC)
- Core colour:
- Several
- Conductor surface:
- Tinned
- Halogen free:
- Yes, No
- Min. permitted bending radius, stationary application/permanent installation:
- 19-60.5 mm
- Reaction-to-fire according to EN 13501-6: Class:
- N/A
- Reaction-to-fire according to EN 13501-6: Smoke production:
- N/A
- Reaction-to-fire according to EN 13501-6: Flaming droplets/particles:
- N/A
- Reaction-to-fire according to EN 13501-6: Acidity:
- N/A
- Low smoke (according to EN 61034-2):
- No
- Low temperature resistant (according to EN 60811-504+505+506):
- No
- Oil resistant according to EN IEC 60811-404:
- No
Automatic strip and crimp machine for ferrules
Automatic strip and crimp machine for insulated end sleeves 0.5-4 mm².
Stripping and crimping are carried out in a single step, which enables efficient and time-saving processing.
Technical data
Operation mode: Automatic trigger operation and manual operation
Twisting function: Yes
Wire size: 0.5-4 mm²
Stripping lenght: 3-17 mm
Max tube leght: 12 mm
Crimp shape: Quadrilateral crimp
Production capacity: 2.8 s/wire
Air Supply: 6-8 Bar
Power source: 220-240V AC/50HZ
Weight: 40 kg
Dimensions WxLxH: 350 x 450 x 400 mm
- Number of crimps:
- 1
- Strip length adjustable:
- Yes
- With locking device (for mechanical tools):
- No
- Inserts exchangeable:
- No
- Number of included inserts:
- 1 .
- With automatic return:
- Yes
- Cycle time:
- 2.8 s
- Suitable for:
- Cable end sleeves
- Adjustable conductor cross section:
- 0.5-4 mm²
- Function:
- Skin and crimp
- Type of drive:
- Electrical
- Strip length:
- 3-17 mm
- Construction/operation:
- Pneumatic
- Compression shape:
- Square compression
DINFLEX-CY (LiYCY)
Flexible electronic cable with fine wire conductor structure, as in combination with PVC sheath it provides a very flexible cable with a small bending radius. The cable is fitted with a screen of tinned copper wire, which protects against mechanical stress and particular it isolates all electrical frequency as well inside and outside the cable (EMC Directive). It is used for signal, measurement, control and tone-frequency transmission in electronics, computers and signal systems.
Structure Conductor: Blank stranded copper
Conductor insulation: PVC
Core identification: According to DIN 47100
Screen: Tinned copper braid
Outer Sheath: PVC
Sheath identification: Grey PETP-foil
Technical data:
Rating voltage: 0.14 mm² = 350 V > 0.14 mm² = 500 V
Test voltage: 0.14 mm² = 800 V > 0.14 mm² = 1200 V
Temperature range: Fixed min/max: -30ºC to +70ºC (-22ºF to +158ºF)Moving min/max: -5ºC to +70ºC (+23ºF to +158ºF)
Radiation Resistance: 8 x 107 cJ/kg
Minimum bending radius: 10 x cable diameter
Oil resistance: Good
Flame resistance: IEC 332-1
- Number of cores:
- 2-50 .
- Material core insulation:
- Polyvinyl chloride (PVC)
- Specification core insulation:
- Other
- Core identification:
- Colour
- Protective conductor:
- No
- Material outer sheath:
- Polyvinyl chloride (PVC)
- Specification material outer sheath:
- Other
- Colour outer sheath:
- Other
- Flame retardant:
- According to IEC/EN 60332-1-2
- Permitted cable outer temperature after assembling without vibration:
- -30-70 °C
- Conductor material:
- Copper
- Twisted cores:
- Yes
- Max. conductor temperature:
- 70 °C
- Screen:
- Yes
- Armouring/reinforcement:
- Braiding
- Insulation integrity:
- N/A
- Drain wire:
- No
- Nominal voltage:
- 500 V
- Halogen free:
- No
- Conductor category:
- Class 5 = flexible
- Colour:
- Grey
- Material insulation:
- Polyvinyl chloride (PVC)
- Core colour:
- Several
- Conductor surface:
- Bare
- Halogen free:
- No
- Min. permitted bending radius, stationary application/permanent installation:
- 18.5-64 mm
- Reaction-to-fire according to EN 13501-6: Class:
- N/A
- Reaction-to-fire according to EN 13501-6: Smoke production:
- N/A
- Reaction-to-fire according to EN 13501-6: Flaming droplets/particles:
- N/A
- Reaction-to-fire according to EN 13501-6: Acidity:
- N/A
- Low smoke (according to EN 61034-2):
- No
- Low temperature resistant (according to EN 60811-504+505+506):
- No
- Oil resistant according to EN IEC 60811-404:
- No
