RFC-serien

NK-serien

Mycket lätt kabelhållare för skruvmontage.

Material: Nylon 6/6 (UL 94 V-2)
Färg: Natur

MFS-serien

Flatkabelhållare för hålmontering.

Mått: Se ritningen

CKN- och CKS-serien

Kabelhållare med eller utan självhäftande tejp.
Klarar diameter från 5.4-38.0 mm.

CKN: Självhäftande tejp
CKS: Hålmonterad

Håldiameter: 6.4 mm (CKS)
Mönsterkorttjocklek: 0.5-4.1 mm
Material: Nylon 6/6 (UL 94 V-2)
Färg: Grå

FCS- och FCN-serien

Flatkabelhållare med eller utan självhäftande tejp.

FCS är för hålmontering.
FCN är med självhäftande tejp.

Material: Nylon 6/6 (UL 94 V-2)

TRM Series

Ferrite cores for round cables. Provides effective attenuation of low frequency interference (kHz to MHz). Manufactured from manganese zinc and offering high impedance for improved EMC performance, especially when the cable is wound around the core to increase the effect by a factor of 2 (N²). Features a blue green epoxy coating for identification and rounded edges to reduce strain on the cable. Operating temperature −40 to 85 °C.

A = Outer diameter (OD)
B = Inner diameter (ID)
C = Width (W)
Z = Impedance, Ω/10MHz (2 turn)

Cable holder with a fastening arm designed to keep cables either bundled or aligned in parallel. The fastening arm is equipped with foam insulation that protects the cables from wear. The housing is made of color‑coated steel for added durability, and the age‑resistant adhesive tape provides strong, long‑lasting adhesion.

Suitable for cable diameters from 9–15 mm.
Color: Grey
Available in four different sizes.

KGLS-S

Kortdistans mellan chassi/PCB eller PCB/PCB från 2.0-39.9 mm.

Material: Nylon 6/6 (UL 94 V-2).

KGLS-R

Kortdistans mellan chassi/PCB.

Material: Nylon 6/6 (UL 94 V-2).

Passande mönsterkorts tjocklek: 1.6 mm (.063").
Passande chassistorlek: 1.0-1.6 mm (.039"-.063").

KGLS-M

Självhäftande kortdistans mellan chassi/PCB.

Material: Nylon 6/6 (UL 94 V-2).

Passande mönsterkorts tjocklek: 1.6 mm (.063") eller 2.0 mm (.079").

KGPS-S

Kortstöd för mönsterkort.

Material: Nylon 6/6 (UL 94 V-2).

KGPS-R

Kortstöd för mönsterkort.

Material: Nylon 6/6 (UL 94 V-2).

KGTS-T

Kortdistans mellan chassi/PCB. Skruvas fast i chassit.

Material: Nylon 6/6 (UL 94 V-2).

Passande mönsterkorts tjocklek: 1.6 mm (.063") eller 2.0 mm (.079").

RI-serien

TR-serien

For cables, tubes and conduits. Halogen free, non-flammable, heat-resistant and UV-resistant (black). Has high flexibility and provides very good protection against mechanical impact.Spirals are cut counter-clockwise. Material: PolyethyleneTemperature range: -10 degrees Celsius to +40 degrees Celsius Supplied in box.

For cables, tubes and conduits. Halogen free, non-flammable, heat-resistant and UV-resistant (black). Has high flexibility and provides very good protection against mechanical impact.Spirals are cut counter-clockwise. Material: PolyethyleneTemperature range: -60 degrees Celsius to +85 degrees Celsius Supplied in bag.

KCF-serien